Maintenance Method Of Mobile Crusher

Abstract

This article explains how to maintain your mobile crusher so that your machine can last longer. 1. Regularly check the machine for wear It is necessary to regularly check the wear of the internal components of the machine, such as the wear of the central inlet pipe, cone cap, impeller upper and lower runner linings, circumferential guards, and jaws. If the wear is serious, repair or replace it in time and replace at the same time. The weight, model and size of the components must be replaced according to the original component parameters. 2. Do a good job in lubrication Pay attention to the lubrication of the friction surface in a timely manner, and the grease used should be determined according to the place of use and temperature conditions. Generally, calcium-based, sodium-based and cal...

Case Detail

This article explains how to maintain your mobile crusher so that your machine can last longer.

1. Regularly check the machine for wear

It is necessary to regularly check the wear of the internal components of the machine, such as the wear of the central inlet pipe, cone cap, impeller upper and lower runner linings, circumferential guards, and jaws. If the wear is serious, repair or replace it in time and replace at the same time. The weight, model and size of the components must be replaced according to the original component parameters.

2. Do a good job in lubrication

Pay attention to the lubrication of the friction surface in a timely manner, and the grease used should be determined according to the place of use and temperature conditions. Generally, calcium-based, sodium-based and calcium-sodium-based greases are used; when adding grease Roller bearing raceways should be cleaned with clean gasoline or kerosene first, and then added. The grease in the bearing housing should be about 50% of its space volume, and it should be replaced every 3 to 6 months. The normal operation of the machine extends the service life.

3. Keep the equipment clean

It is necessary to keep the equipment clean frequently so that there is no dust accumulation, no oil pollution, no oil leakage, no water leakage, no electricity leakage, no ash leakage, and it must be noted that dust and other debris must not enter the lubrication system and lubrication parts, because these debris not only It will damage the lubricating oil film, and will cause the equipment to lose lubrication and increase wear and shorten the service life of the equipment. In particular, pay attention to the regular cleaning of the bearings. After the crusher has been operated for 2000 hours, open the main shaft assembly to clean the bearings. The general work is 7200. Replace the bearings with new ones after hours.

You May Be Interested In

Other Case